KUSBA Mount for Micro Swiss NG Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the Klipper USB Accelerometer board compatible for MicroSwiss NG extruder. Remix of Koop's design.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Koop's design of the Mount for the Klipper USB Accelerometer board compatible with MicroSwiss NG extruder. As the original, this remix is compatible with KUSBA v2.3 and v2.4.
I changed the design to insert M3 nuts during printing instead of using threaded inserts for the KUSB pcb and the extruder backplate. To hold the pcb I used M3x5 bolts and for the backplate I replaced the black bolt that came with the extruder with an M3x12 bolt.
Printed and installed on an Ender 3 Pro.
Print instructions
Layer height: 0.2mm
It requires 2 pauses to insert the M3 nuts, the first one at layer 24 (4.8mm) for the 2 horizontal nuts and the second one at layer 58 (11.6mm) for the vertical nut. See attached images.
I used nuts 2.4mm thick. The placeholder have a tolerance of ~.4mm, it will depend on the printer.
To avoid collisions between the nozzle and the vertical nut after it's inserted I set the following printer settings in PrusaSlicer:
