KUSBA Mount for Micro Swiss NG Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the Klipper USB Accelerometer board compatible for MicroSwiss NG extruder. Remix of Koop's design.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 63
- Makes
- 0
- Views
- 673
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of Koop's design of the Mount for the Klipper USB Accelerometer board compatible with MicroSwiss NG extruder. As the original, this remix is compatible with KUSBA v2.3 and v2.4.
I changed the design to insert M3 nuts during printing instead of using threaded inserts for the KUSB pcb and the extruder backplate. To hold the pcb I used M3x5 bolts and for the backplate I replaced the black bolt that came with the extruder with an M3x12 bolt.
Printed and installed on an Ender 3 Pro.
Print instructions
Layer height: 0.2mm
It requires 2 pauses to insert the M3 nuts, the first one at layer 24 (4.8mm) for the 2 horizontal nuts and the second one at layer 58 (11.6mm) for the vertical nut. See attached images.
I used nuts 2.4mm thick. The placeholder have a tolerance of ~.4mm, it will depend on the printer.
To avoid collisions between the nozzle and the vertical nut after it's inserted I set the following printer settings in PrusaSlicer:
