1 / 3
Yubico YubiKey 5 Series Case Cover for USBA and USBC — zdjęcie 1
1 / 3

Yubico YubiKey 5 Series Case Cover for USBA and USBC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handy case cover for the YubiKey 5 Series keys. Will protect your key from brutality of external worl!

Ocena
4,5 / 5
Polubienia
37
Pobrania
697
Wydruki
4
Wyświetlenia
2993
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Intro

This is a simple case/holder/cover for Yubikey 5 series USB A and USB C. 

Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key!

Info

It can be printed without supports. I printed it with 0.12 layer height and 40% infill, 3 walls with Nylon for better strength. For sure it can be printed in PLA, PETG and others. 

The case rely on hole of the Yubikey so you won't loose your key in case of a case damage.

The clearances are important.
I found that 0.25mm from each side for the key hole side gives good results.
0.1mm from each side of the port side assures that key will fit there firmly and won't eject by itself. 
For your printer, you may have to scale the model a bit. Or edit the included .step files to suit your needs. 

All walls are 2mm.

Options

I also included version with name, i.e. is it a USBC or a USBA version. 

Tagi