FLSUN Super Racer (SR) KUSBA (ADXL345) Clip / Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip to install a Kusba accelerometer to your SR hotend
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I had enough to have an ADXL345 with a Raspberry Pico hanging around so i bought a Kusba.
In my case i printed it in PLA+ but being so close to heated parts PETG or ABS would be ways better (i still have to test the one i printed in PLA for heat resistance).
4 walls are strongly raccomended.
2 M3 brass inserts are required so as 2 M3x4mm screws.
The piece clips itself strongly to the leveling probe mount (without interfering with it).
IMPORTANT: my hotend is equipped with a full volcano heatblock, so there is enough tolerance to leave the accelerometer where it is and being able to print. In a standard Super Racer it may not be the case, so check for measures and/or unscrew the Kusba from the clip before printing.
Hope it may be useful to somebody beside me.
