1 / 2
FLSUN Super Racer (SR) KUSBA (ADXL345) Clip / Mount — image 1
1 / 2

FLSUN Super Racer (SR) KUSBA (ADXL345) Clip / Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A clip to install a Kusba accelerometer to your SR hotend

Rating
0 / 5
Likes
0
Downloads
13
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I had enough to have an ADXL345 with a Raspberry Pico hanging around so i bought a Kusba.

In my case i printed it in PLA+ but being so close to heated parts PETG or ABS would be ways better (i still have to test the one i printed in PLA for heat resistance).

4 walls are strongly raccomended.

2 M3 brass inserts are required so as 2 M3x4mm screws.

The piece clips itself strongly to the leveling probe mount (without interfering with it).

IMPORTANT: my hotend is equipped with a full volcano heatblock, so there is enough tolerance to leave the accelerometer where it is and being able to print. In a standard Super Racer it may not be the case, so check for measures and/or unscrew the Kusba from the clip before printing.

Hope it may be useful to somebody beside me.

Tags