Counting matching models…
Update - The Dowels have now been fixed! Added a 25% scaled up version! Looks elegant and details are more prominent! - Scaling up the model by 20-30% will look amazing! Lockheed Martin's Blackbird SR71 is one of my all time favourite…
If you would like to download this, please do so from MakerWorld - https://makerworld.com/en/models/96340
T34-85 USSR tank. The scale is 1:100. Only 2 parts. T-34-85 - the military designation of the latest modification of the Soviet medium tank T-34 with an 85-mm caliber gun. Adopted by the Red Army by GKO Decree No. 5021 of January 23,…
This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. For the assembly, I recommend to watch…
UPDATE 8/17/2023: Updated Build Guide from v0.1 to v0.2. This includes more information and links in the electronics and internals section of the Parts List, more specifically adding the specific battery needed to fit inside of this…
Snapmaker U1 DIY Top Hat By. Srin Snapmaker U1 DIY Top Hat 입니다. This is a Snapmaker U1 DIY Top Hat. 최소한 250mm 출력이 가능한 프린터가 필요합니다. A printer capable of printing at least 250mm is required. https://github.com/srinn/Snapmaker-U1-DIY-Top-Hat…
Print settings (example) Raft or Brim: None Supports: No Layer height: 0.2 mm Infill: 100 % Screw hole is 4mm diameter.
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
I liked the Bit-Holder for cordless screwdriver (Bosch) and had used it for several month, until eventually it broke recently as it has a weak spot at the right arm. As anyway the original was way too tight (had to scale up and expand the…
The legendary SR-71 Blackbird, now brought to you in Kit card form! The SR-71 Blackbird was a high altitude, stealth reconnaissance jet, capable of traveling at speeds of over mach 3. Operated by the United States Air Force between 1966…
1 Setup The FLSun SuperRacer is not official supported in the PrusaSlicer software. So we need add our own printer or use a similar to start with. Let's go! 1.1 Initial printer setup We start the PrusaSlicer and then from the…
The Shell Case is a simple and effective solution for organizing cooling on the ASRock AMD BC-250 module. This snap-on shell allows you to mount a single fan quickly and securely without modifying the card or its case. The model requires…
Summary This is a model of a Dodge Viper GTS Coupé (SR II) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated…
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
The new model of SRAM chain gap tool provided with AXS derailleurs Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Prusament PLA Category: Tools
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
DIN rail mount for a SSR. Designed for the SSR that comes with the RatRig V-Core 3. A optional spacer for better air circualtion is also available. Prints without supports. Printed in PETG at layer height 0.2mm. Mount is designed for M3…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
This is the Signal Disruptor / Mute Jammer from Rainbow Six Siege. The model is Printed seperately and assembled after printing. Since Thingiverse only supports single file downloads due to increasing incompetence, I had to include…
The pedal faces don't require the spacers and the spacers don't require the pedal faces. You can use either independently. Pedal Faces: * Less slippy than original pedals when playing in socks * Can be used with the original m4x8mm…
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
- Toy style two-piece dual color version of Lockheed Martin's Blackbird SR-71 and F-35. - Easy to resize, easy to print (no supports) and to be used as giveaway, toy, or design object - ideal with the small optional stand for a table. -…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
[NOTICE]: I just added a new version with wider hole spacing for someone's SRP Lite. For others with SRP Lite those holes don't seem to work. Measure your own pedals to see which ones you have. Modelled entirely myself, but mostly a…
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
This is my model of the SSV Normandy SR1 from the Mass Effect series. The ship is done in scale with my SR2 . The pieces are divided per their color. For the assembly, I recommend to watch the following video.
Five Shekel coin with two key-chains for supermarket trolley (Israel) Print instructions Category: Household Supplies Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.1 Infill: 20
Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…
This design uses the FLSUN SR printer itself to print the parts. Each panel for the enclosure is held on using 10x3mm round magnets as well as m3 screws and m3 T-nuts. The 6 panels are standard 12x12 inch sheets with 1/16 inch width.…
Remix of https://www.printables.com/model/137697-ssr-din-rail-mount to mount SSR from Rat Rig kit horizontally.
This is a mount so I could easily fit a Cardo Spirit HD intercom to my Shoei GT Air II motorcycle helmet using the SRL2 standard fitting system. Shoei helmets are built to take their own intercom system but it's very expensive and I…
Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…
With this mount you can hang your LEGO Porsche 911 rsr on the wall. The width of the screw hole is 5mm. You hang it on the grey axle as shown in the picture. Dimensions are: 22mm(width) x 30mm(height) and it sticks out 18mm from the wall.…
The 1.2L Replacement case for DeskMini x300. Basic “slots” styled core that's compatible with the whole DeskNano x300 system. This core fits most coolers, but doesn't fit Wraith Stealth. See if you can print this first, since the other…
SRAM eTap/AXS Cover for Battery Block | Front/Rear Derailleur and Dropper Post Print in PLA 0.4 mm Nozzle 0.2mm Layerhight. Supports Yes
Remix of the sanding stick screws for the Customized Sanding Sticks by fuchsr Customized Sanding Sticks with Labels by fuchsr | Download free STL model | Printables.com Increased the height of the knobs from 3mm to 7mm and added small…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
A wall hook for the Lego Porsche RSR to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are…
Improved fan duct flsun super racer (the probe can fit)
This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes. DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8…
Provided with brand new EAGLE 12 speed system, this tool allows you to set the correct distance between the pulley and the cassette. Print instructions You are absolutely free ! I printed it in PLA, no need to set the infill as it's…
This is a remix from a model from BR562 on SKFB. I figured there weren't any really good models of the UNSC's primary tactical dropship so I updated this one and added many surface details the original lacked. Always drink from the skulls…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Check out my Amazon Page to see what kind of gear I use to make these models! This was designed to be used as a classroom exercise to teach students about 3D printing, math, and design all at once. Print out these blocks and assemble them…
https://apolloautomation.com/products/msr-2 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
It is a remix of one design found here but i can not find the link now. It is shorter and i added one version with angle in case of mounting under the shelf. (As I did) Print Settings Printer: Pinky Rafts: No Supports: No Resolution: 0,4…
This is the case for HC-SR04 ultrasonic sensor (RED VERSION). The blue one has diffrent dimensions and is not compatible with this case. Print Settings Rafts: No Supports: No Filament: Doesn't matter Category: DIY
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
A set of spacers designed to advance a single piston or two pistons on the same side of the caliper. There is a left and a right side spacer that advance a single piston in the case of a sticky piston or to clean each piston. There are 4…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
Low-Poly model of a 2022 Dodge Challenger SRT Hellcat. Included are two Bodies, one with headlights and one without, functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This iconic…
A simple adapter to fit the Simagic HPR to Moza SR-P and possibly SR-P Lite pedals. Mounts to the back of the pedal and holds the HPR to the back. Requires 4x M4x15 countersunk screws to hold the HPR to the adapter, and 4x M4x10…
a minimal case for a HC-SR04 sensor, fits without screwing.
Simple holder for Shimano cassettes with the lockring. Three versions are available: 11 speed version Fits road 11 and 12 speed cassettes Any cassette can fit on this version, but anything that's not 11 or 12 speed road will have a gap…
I like the TUSH ( https://www.thingiverse.com/thing:2047554 ) but it's a bit fiddly and requires care placing spools on it. I'm lazy, so I developed this tabletop spool holder. Just drop your spools on it and go. This design has quite a…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…
Flsun Super Racer SR Feets for more stability 🦾 The model is at the exact same height as the original feets but you can increase or decrease the height easily in you slicer. Printed in TPU 82A and used in this video: Remixed from:…
Holder for Bosch Professional 12V GSR Drill FlexiClick Attachments (Drill chuck, L-piece, etc.) Also see my other Holder for the 12V Drill iteself. Printed with Prusament PETG (Prusa orange). No supports, I printed with 25% linear Infill…
Holder for Bosch GSR 12V-35 (and other similar) Drills (most 12V Bosch GSRs should fit) Also see my other Holder for the different attachments (drill chuck, L-piece, etc) Printed in Prusament PETG (Prusa Orange) and holds up very well…
3D printable cardboard construction screws and handle. I printed the handle with supports. but didn't use any supports with the screws. Printed on a Sainsmart Ender 3 at 0.2mm layer height. It would be nice to have deeper threads but that…
New version Fan Duct for FLSUN SR tested and approved with Pack Volcano MAX form hotends.fr
I recently attended bike tech workshops through the Professional Bike Mechanics Association (PBMA) where I received training in a whole bunch of different things from many different brands. I was constantly thinking "I bet I can 3D print…
Printable UDH hanger. Not sure that I would trust a printed hanger long term but if you need it for a ride and can't get to a bike shop it could be the ticket. I should clarify that this is not a truly universal hanger. Universal…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Does not require support material Print with back face (power cord plugin area) on the print bed
The Lockheed SR-71 Blackbird was a high-speed, high-altitude reconnaissance aircraft used by the U.S. Air Force to gather intelligence and photograph sites that were out of reach of spy satellites: Intelligence gathering : The Blackbird…
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print with 20% infill After printing, the case is ready to slide onto the transmitter and receiver on the HC-SR04.
If you own more than one bike with a SRAM AXS groupset, you may have accumulated a few of the single battery chargers (EP-EAC-BC-A1) like this one: The individual chargers are very light and the cables tend to cause them to slide around…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
can be printed together the model needs to be glued together or separately in other colours the Sr-71 is very realistic Print in place kit card , Assembly required need to use a support
Stylish holder for Bosch electric drill/screwdriver PSR 18 LI-2. ### Update 19.09.23 - Version 2 Increased thickness for more longevity No more screws and nuts are required, only two empty inserts (attached to this model) Additional hooks…
I split the print up into pieces that fit on a Ender 3 Max at scale of 3%. The model acts funny in cura and for some reason I can not fix that but it does print you just have to do some steps when you first import into cura. Step 1. Once…
Anatomicky přesný model srdce ❤
This is a case for a HC-SR04 ultrasonic sensor which is part of water level meter project by using Arduino. The case printed using TPU. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
This is a case for your PIR sensor. It fits perfectly into the case. Have fun :)
I own a SHOEI GT AIR II motorcycle helmet ( I love this helmet ), and was frustrated with not being able to easily mount other communication devices due to the SRL2 mounting points take up room on the helmet rim. I decided to see if I…
Hi! Print as shown on screenshot
I couldn't find a wall mount for the batteries of the Bosch GSR 12V, so I made one. It can be fixed to the wall with two 40mm screws. The holder is slightly tilted for convenience. Update 2023-11-12: Added a non-branded version
I just flattened the foot and added a groove for a servo mount instead at the bottom. A great tutorial on how to make a arduino radar can be found here: http://howtomechatronics.com/projects/arduino-radar-project/ Category: Engineering
This is a casing & supporting cradle for HC-SR04 (Ultrasonic Distance Sensor). Key features: No screws or adhesive need to assemble the unit itself. The vertical angle of the HC-SR04 can easily be adjusted by tilting it up or down in the…
CHOOSE WHAT YOU LIKE: A single complete piece / two parts Choose if you want your Scarlett to be removable or not - also a few options on how removable Additional cable holders with various sizes Honeycomb may save print material I…
Under-desk mount for the Focusrite Scarlett Solo audio interface, mounts with either 3M double sided adhesive tape, or with screws up to 3.5mm in diameter. The mount consists of two pieces which are mirror images, both pieces print…
model exported from Oldschool RuneScape printed in esun pla+ with tree supports
I printed it in PETG on a 0.6mm nozzle at 0.4mm layer height with supports for the fillet of the screw wing. It's very snug - it does not budge when pulling out an audio cable. Print it in the direction of the STL as the back has an inset…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Dodge Charger SRT Hellcat
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
![[Remix] Moza SRP Pedal Faces](https://media.printables.com/media/prints/92352616-5f25-4128-8e0f-dedfb2d90535/images/9523628_1a83e115-11e8-4606-8d85-5759bb99e173_7bdb50b2-2bdb-4b06-bc61-a92ebaa29ace/20250417_181116.jpg)
