HC-SR04 ultrasonic sensor mount for 9G micro-servo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A single print 90º bracket to attach a HC-SR04 ultrasonic sensor to a 9G micro-servo horn using screws.
- Rating
- 4.5 / 5
- Likes
- 40
- Downloads
- 1,753
- Makes
- 4
- Views
- 3,602
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor.
This design is a single piece print with no supports that printed quickly in PLA+ so can easily be mass produced as needed.
The HC-SR04 sensor used mounts easily to the bracket using a small square of double-sided tape.
The 1mm holes were designed for the attachment screws that come with the 9G micro servo but it would be worth checking the spacing matches the servo horns you are using.