DCC++EX case for two buck converters, mega2360, motor shield, & wifi shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for DCC++EX decorated like a US&S railroad signal box
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a case for the mega with wifi shield varient of DCC++EX. It's styled after a Union Switch & Signal signal box, with my own flair on it, of course. It'd would be pretty easy to change the text in something like tinkercad for your own use. Takes 4-40 screws to mount the mega and lid.
The mega goes in the larger slot fully stacked with all 3 boards, space is provided for routing as labelled on the box. The dummy port provides a location to store the USB-A end of the AB cable when not connected to a computer for JMRI or whatnot.
The red section can house two buck converters both wired to the 19V using a barrel port same size as Arduinos use. I had an old power brick for 19V, but with the bucks you can use any power supply.