DCC++EX case for two buck converters, mega2360, motor shield, & wifi shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for DCC++EX decorated like a US&S railroad signal box
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a case for the mega with wifi shield varient of DCC++EX. It's styled after a Union Switch & Signal signal box, with my own flair on it, of course. It'd would be pretty easy to change the text in something like tinkercad for your own use. Takes 4-40 screws to mount the mega and lid.
The mega goes in the larger slot fully stacked with all 3 boards, space is provided for routing as labelled on the box. The dummy port provides a location to store the USB-A end of the AB cable when not connected to a computer for JMRI or whatnot.
The red section can house two buck converters both wired to the 19V using a barrel port same size as Arduinos use. I had an old power brick for 19V, but with the bucks you can use any power supply.