Attachment Mount for KitchenAid Mixer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a small print for those KitchenAid Mixer attachments. I printed the two halves flat side down as printing long…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Here is a small print for those KitchenAid Mixer attachments.
I printed the two halves flat side down as printing long skinny parts vertically never seems to work well for me.
Remixed to add screw holes and alignment sockets. No need to glue:
After printing, use small pieces of raw filament to align the halves.
To position these, I balanced small square post-its on the attachments, then pressed them to the their positions on the shelf. Then I removed the Ikea Ivar shelf, drilled the pilot holes, and screwed in the mounts.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Amazon Basics PLA Gray
Category: Kitchen & Dining