Attachment Mount for KitchenAid Mixer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a small print for those KitchenAid Mixer attachments. I printed the two halves flat side down as printing long…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 15
- Makes
- 0
- Views
- 615
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Here is a small print for those KitchenAid Mixer attachments.
I printed the two halves flat side down as printing long skinny parts vertically never seems to work well for me.
Remixed to add screw holes and alignment sockets. No need to glue:
After printing, use small pieces of raw filament to align the halves.
To position these, I balanced small square post-its on the attachments, then pressed them to the their positions on the shelf. Then I removed the Ikea Ivar shelf, drilled the pilot holes, and screwed in the mounts.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Amazon Basics PLA Gray
Category: Kitchen & Dining