IKEA Maximera Sliding Tray, 15 inch wide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray for IKEA Maximera drawer, 15 inch wide, medium or tall height. Slides on upper rails. Print two identical halves.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a sliding tray for the medium and tall IKEA Maximera drawers which have the upper rails. It fits the drawers sized for the 15 inch wide cabinets. The tray is split into two identical halves. Print the halves in the default orientation with supports on build plate only. They fit together very tightly, so you may need to use a clamp or hit it with a mallet to get them all the way together. You could also sand the bottoms of the square pins to ease fitment. No glue required, though a few dabs of super glue would not be a bad thing for extra strength.
Dimensions:
Overall size: 326mm x 84mm x 17mm
Width between rails: 298mm
Tray inner volume: 294mm x 78mm x 15mm
Minimum inner width (between connectors): 70mm