Selphy CP1500 Ugreen Nexode Battery Holder - V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use your 130W Ugreen Nexode powerbank to power your CP1500 on the go with this 3D printed holder!
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 219
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw some videos on Youtube showing that you can use your 130W Ugreen Nexode powerbank to print on the go, but no-one did an holder for it, so here it is!
This 3D model replicates the mechanism presents on the original battery, with some imagination, we can create whatever accessory for this printer.
Have a look at the video I made to see how it's done! 😉
/!\ Do not add support in your slicer in the path of the velcro strap as mentioned in the video: your printer will bridge without it. Supports would be too hard to remove /!\
-- Parts you'll need for this build --
Links / Country | [US] | [FR] |
|---|---|---|
100W DC 5.5x2.5mm to Type C USB-C Adapter | ||
aceyoon 240W Short USB C Cable 0.6ft, 90 Degree USB C to USB C Cable (or equivalent) | ||
2x 30cm, 1cm wide Velcro Strap (or equivalent) |
Model of Ugreen Nexode powerbank used: PB721