Liczymy pasujące modele…
This is designed to fit the charger with the rubber feet attached so no modifications to the charger are required. I printed with some supports on the rounded edge, but they are not required if you're happy with rough edges.
Vertical holder for Ugreen Nexode 100W charger. It includes cable holder to prevent damages on the USB C plugs. Print with supports. Stick it to the wall with double sided tape. Slots for cable should be able to take the Ugreen 100W PD…
A wall/desk mount for the Ugreen Nexode 65W 4-port USB charger based on the Ugreen Nexode 200W Wall/Desk Mount by dead1egs .
This is a 3D-printable TPU cover for the UGREEN Nexode Power Bank 25000mAh . The cover is designed to: Protect the power bank from scratches, minor drops, and daily wear. Maintain access to USB-C ports, power button, and LED indicators.…
I lost the shoes of my Ugreen Nexode RG charger, so I made new ones. And unlike the stock ones, they can be printed in fancy colors. Dimensional accuracy is important, so I'd recommend selecting the “External perimeters first” option of…
Thanks to the Underware 2.0 Customizer, I have adapted the mount for an UGREEN Nexode 100W Desktop Charger.
This is a wall mount for "UGREEN Nexode 65W USB C" table charge device.
Scanned with Creality Sermoon S1.
A cover for the UGREEN Nexode charger. I have the 100W charger, but it will probably also fit the 65W and 45W versions as well (the 100W charger measures 50.5mm square). It may also fit the Uno range as well, but I don't have one of those…
-A simple cable holder for the Ugreen Nexode 100W Power Bank (UGREEN Nexode Power Bank 12000mAh 100W) will certainly fit other models of these dimensions. - Some Anker power banks have similar / identical dimensions - power bank…
Update: Also works with the Trackit SR Scan used for design: https://www.printables.com/model/1413825-ugreen-nexode-25000mah-powerbank-scanhttps://www.printables.com/model/1413825-ugreen-nexode-25000mah-powerbank-scan Usage This mount is…
Model to mount the UGREEN Nexode 65W desktop charger under the desk. Fitment is a little bit loose. Printed with some polymaker PLA, standard 0.2mm profile on a P1S. No supports needed! .f3d .3mf and .stl is available to download
A holder for a charger. You've seen the title. I recommend using single piece snaps . Also openGrid "full" since this charger is an absolute unit.
Skadis mount for the UGreen 100w 20,000 mAh Power Bank. Includes the ability to store the provided USB cable.
3D Scan of UGREEN Nexode Power Bank
2.5U 19 inch rack front panel mount for Ugreen Nexode CD271 200W USB Charger These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount / cover…
This is v3.1 of the model, the UGreen Nexode Batterybank Edition. Superior ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design…
Overview Reclaim your workspace and secure your powerful Ugreen Nexode 200W (4-Port) charger with this meticulously designed, low-profile bracket. Whether you want to mount it to a wall, under a desk, or to the side of a workbench, this…
This is a dock/caddy I made to attach to the backside of my bedside table. This lifts up the charger off the ground, resulting in less USB cable length needed. It also has a frame with holes for the cables to slot through, resulting in…
A simple mount for a UGREEN Nexode 200W mount for under a desk. I'm uploading this on the off-chance someone else wants to make use of it. The screw mounts are "in-line" with the power plugs. I did this due to space limitations. I mounted…
**It should be noted that as of publishing this remix, I have not fully tested the model to make sure #10 pan head wood screws fit properly in the mounting holes or not. If not, I will either update the model or the description…
Printing Instructions Filiment Print in a durable slightly flexable filiment like PETG though PLA may be good enough Slicing print vertically back to the build plate no supports required V1 or V2 the differnce bettween V1 and V2 is the…
This holder keeps a UGREEN Nexode X 65W charger (Euro Plug version) neatly tucked in the middle of a cable organizer. There are two slots to push the USB-C plugs through, so the cable keeps tidy without the need for an elastic band or…
This Gridfinity 1×3 holder is specifically designed for the UGREEN Nexode Wireless Power Bank 10000 mAh (magnetic, USB-C 20 W) . It provides a clean, secure, and space-efficient storage solution within any Gridfinity system. The power…
Coil the power input and USB cables to clean up the clutter at your charging station. Print in PLA or PETG without supports.
I saw some videos on Youtube showing that you can use your 130W Ugreen Nexode powerbank to print on the go, but no-one did an holder for it, so here it is! This 3D model replicates the mechanism presents on the original battery, with some…
slide on tray for charging brick. We use it for adapters to older USB standards.
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
Otro protector para cargador UGREEN Nexode Pro 65W espero les sirva
Hello A cover protection fot this usb charger UGREEN Nexode 4 Port GaN Fast Charger, such cover avoid to bend accidentaly the plug pins inside the backpack or travel bag. Regarsd Jonweb Print Settings Printer Brand: Creality Printer: K1…
I have been developing a desktop rack for use as a monitor riser and organizer. I remixed this model to incorporate a rack ear, so that it can be mounted for easy access.
With the Steam Frame battery life leaving a lot to be desired, I decided to try and come up with a design to hold my UGREEN 20000 mAH battery bank on my belt. The battery bank I designed it around;…
I needed a power bank holder for my Insta360 Luna Ultra and Tripod so I could do extended 4k30FPS recordings. I'm sure someone could remix it to make it better collapsible for storage, but for my purposes it works great. Recommending…
UGREEN Nexode Pro 160W Travel Case (TPU + PETG) A dual-material rugged travel case designed specifically for the UGREEN Nexode Pro 160W GaN Charger (EU Version) . It features a shock-absorbing TPU 95A inner sleeve nested inside a solid…
Ich habe mich für die UGREEN Nexode 145W entschieden, weil 90Wh für den ganzen Tag im Bildschirmmodus eines Handys ausreicht. Die Kompatibilität mit Fahrradtaschen ist gespeichert. Um sie besser vor Regen zu schützen, ist die Powerbank…
UGREEN Nexode Air 45W Gridfinity
I added a negative on to the case so that the killswitch adapter can be glued into it and I can then have a portable battery pack for my steam deck. I printed in PETG. Glue and clamp pieces together with superglue and leave enough time…
This is a handy mount to always have your ugreen nexode (model PB537) power bank always by hand! You can mount it via command strips to almost any surface.
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
This Gridfinity 1×3 holder is specifically designed for the UGREEN Nexode Wireless Power Bank 10000 mAh (magnetic, USB-C 20 W) . It provides a clean, secure, and space-efficient storage solution within any Gridfinity system. The power…
Protector de PLA para cargador modelo UGREEN Nexode 30W Mini, espero les sirva Se le puede adherir el siguiente organizador de cable para portarlo mas comodamente…
Simple holder to attach the UGREEN charger to the wall with 2 screws.
Simple cable management for the UGREEN Nexode 100W usb-c charger. Slip the frame over the charger and wrap those cables out of the way!
Simple holder to attach the UGREEN charger to the wall with 2 screws.
