1 / 8
Unifi UTR Thermal Spacer Plate (v3.1 UGreen Nexode Edition) — zdjęcie 1
1 / 8

Unifi UTR Thermal Spacer Plate (v3.1 UGreen Nexode Edition)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,85 € – 1,04 € netto (bez VAT)

Dla pliku: Unifi Travel Router (UTR) Cooler Shim v3 UGreen Nexode BatteryBank_0.4n_0.2mm_PETG_COREONE_59m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,95 € netto (środek widełek).

Masa podana przez autora
12 g
Czas druku podany przez autora
58,8 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Reduces temperature between the UTR & a UGreen Nexode Batterybank. Wide profiled cuts, 3mm air gap & band guides (v3.1)

Ocena
0 / 5
Polubienia
4
Pobrania
37
Wydruki
0
Wyświetlenia
300
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is v3.1 of the model, the UGreen Nexode Batterybank Edition.
Superior ventilation ability but supports are required.

  • Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up

  • Ventilated underside design promotes air circulation (improved over v1)

  • Helps maintain lower operating temperatures during sustained use

  • Designed for use between travel routers & the UGreen PB763 or PB761 Powerbank, profiled retainers to keep the UTR & UGreen Powerbank in position relative to one another

  • Lightweight, low-profile form factor adds cooling without bulk

  • Precision-fit footprint for stable placement and reduced wobble

  • Ideal for portable setups, travel rigs, and always-on devices

  • Optimized for 3D printing with common materials (PLA, PETG, etc.)

  • Simple, durable design with no assembly required, supports required are required!

Powerbank in photos is UGREEN Nexode Qi2 10,000mah, PB763 is the model number.

v3.1 (this model), v3 & v2: The temperature readings I get on the UTR is 40.2°C on the screen. 41.1°C hottest spot on top, and 42.6°C max on the bottom when using the model.

v1: The temperature readings I get on the UTR is 42°C on the screen. 42.4°C hottest spot on top, and 45.6°C max on the bottom when using the model.

PETG would be ideal as temperatures are too close to 50-60°C for PLA usage, but still possible.

Need the regular model for other powerbanks, batterypacks or other smooth surfaces? Check out v3 of this model here:

Tagi