UGREEN Nexode Pro 160W Travel Case (TPU + PETG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged TPU+PETG travel case for the EU UGREEN Nexode Pro 160W GaN charger (model 25095). Snug fit, zero wobble.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UGREEN Nexode Pro 160W Travel Case (TPU + PETG)
A dual-material rugged travel case designed specifically for the UGREEN Nexode Pro 160W GaN Charger (EU Version).
It features a shock-absorbing TPU 95A inner sleeve nested inside a solid PETG sliding outer shell to safeguard your high-end charger from impacts and scratches in your backpack.
Features
Hybrid Dual-Material Armor: Soft TPU dampens drops while rigid PETG protects against crush forces and friction.
Snug Slide-Lock Fit: Designed with tight tolerances to prevent accidental opening during transit.
Ergonomic Side Cutouts: Deep finger recesses make sliding the sleeve out effortless.
Quick-Eject Base Hole: Push hole at the bottom allows fast removal of the charger from the TPU sleeve.
Strict Compatibility Notice
WARNING: This case is strictly tailored to the EU plug version of this specific charger. It does not fit US/UK models or other wattage variants.
Brand: UGREEN
Model: Nexode Pro 160W 4-Port GaN Fast Charger (EU Plug)
Model / SKU:
25095ASIN:
B0CCXTZHHFProduct Link: UGREEN Nexode Pro 160W EU Official Store
Print Settings
Parameter | Inner Sleeve (TPU) | Outer Shell (PETG) |
|---|---|---|
Material | TPU 95A | PETG |
Layer Height | 0.20 mm | 0.20 mm |
Walls / Perimeters | 4 | 4 |
Top / Bottom Shell | 1.5 mm | 1.5 mm |
Infill | 15% (Grid) | 100% (Solid) |
Supports | None | None |
Printing Orientation
Inner TPU Sleeve: Place flat on its closed base with the top cavity opening facing upward.
Outer PETG Shell: Place flat on its closed face resting directly on the build plate.
Fit & Break-in Warning
Tolerances are intentionally very snug. Ensure your printer's flow rate and extrusion are properly calibrated before printing.
The sliding action will feel quite stiff during the first several uses. Once cycled a few times, it achieves an optimal, smooth slide with zero wobble.