Arm Brace for Excavator Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Brace for the joints on the Excavator Arm by Ramonin3d. Useful to repair or pre-reinforce the original
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
My child loves the Excavator Arm by Ramonin3d. But the dove tail joints (which you glue together) all snapped over time. So I made a "splint" or "brace" to re-enforce those joints. After the joint broke, I put the brace over, put glue in the middle and glued the braces to the broken joints. Worked out pretty well.
This can be printed without supports if you print on one of the skinny edges. This will minimize bridging distances at the top. I tried to make sure there was enough material on those edges to have good bed adhesion and it has worked for me.