Mitsubish Evolution X Gauge Pod (52mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snap-fit gauge pod for the Mitsubishi Evolution X (2008) with the open lower cubby. It holds 2x 52mm gauges
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this as two files, a thicker version that I printed in PETG for durability, and a thinner one that I made into a simple faceplate because PLA was holding the carbon fiber pattern better at the time. I was using a CF pattern vinyl sticker on a plain build plate. The PETG temps were melting the sticker.
You can also just print the thicker version on a patterned build plate and forego the faceplate.
This faceplate has a mounting point and cutouts for an aftermarket stereo microphone as well as the USB-C connector dongle.
The pod doesn't require any fasteners to stay in place. The shape of the edges holds it into the seams on the cubby.