Parkside Screw Driver Power Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple part for inserting 3xAAA batteries instead of only two. Because higher voltage, also rechargable AAA work now
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
With this adapter added to your Parkside srewdriver, you can insert 3xAAA instead of only 2xAAA. This gives a little more power to the tool. Because of the raised voltage, one can also use rechargeable batteries now without any power loss.
Printing:
Print in the given orientation with all settings as you see fit. 0.2 layers work fine.
A "Support part" is allready in place. You can remove it if you want to use your own support.
Assembly:
Screw the adapter in the Screw driver first, in order to free the threads before final assembly.
After removing it again, feed some cable through the adapter as seen on the pictures.
0.5mm² works fine (roughly 20awg). You can secure it with some drops of superglue on some places if needed.
Put all parts together, insert batteries, done :)