1 / 5
Custom Wide Neck Concert Ukulele
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Similar to all my other headless ukulele designs. I designed it for folks with bigger hands and fingers, the nut width…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Similar to all my other headless ukulele designs. I designed it for folks with bigger hands and fingers, the nut width is 40mm, 10mm between strings. It can be printed with FDM printers of at least 300mm in Z-axis, and 250mmx250mm on X & Y. I haven't printed this yet, so if you did successfully, please link your make here with photos and videos to show sound quality.
This model comes in 5 pieces to be glued together:
- Body, max length ~292mm
- Print like a vase, i.e. neck pointing up, so no internal support needed
- Neck, max length ~233mm
- Print flat face on plate
- Fretboard, max length ~248mm
- Print flat face on plate
- Bridge, to be screwed and/or glued to body
- Print flat face on plate
- Guides (for string at tail), to be glued into body
- Print flat on plate
Other parts needed:
- 2 pieces of carbon fiber rods e.g. from DragonPlate to be the spines of this unit, otherwise it will buckle under string tension, cut it down to size of ~472mm
- 4 small friction or planetary tuning pegs e.g.
- Google Seach Friction pegs...
- Google Seach Gotoh UPTL...
- You'll need the Long version i.e. UPTL as the thickness of tuning stem hole is roughly 9.6mm
Category: 3D Printing