1 / 5
Custom Wide Neck Concert Ukulele
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Similar to all my other headless ukulele designs. I designed it for folks with bigger hands and fingers, the nut width…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Similar to all my other headless ukulele designs. I designed it for folks with bigger hands and fingers, the nut width is 40mm, 10mm between strings. It can be printed with FDM printers of at least 300mm in Z-axis, and 250mmx250mm on X & Y. I haven't printed this yet, so if you did successfully, please link your make here with photos and videos to show sound quality.
This model comes in 5 pieces to be glued together:
- Body, max length ~292mm
- Print like a vase, i.e. neck pointing up, so no internal support needed
- Neck, max length ~233mm
- Print flat face on plate
- Fretboard, max length ~248mm
- Print flat face on plate
- Bridge, to be screwed and/or glued to body
- Print flat face on plate
- Guides (for string at tail), to be glued into body
- Print flat on plate
Other parts needed:
- 2 pieces of carbon fiber rods e.g. from DragonPlate to be the spines of this unit, otherwise it will buckle under string tension, cut it down to size of ~472mm
- 4 small friction or planetary tuning pegs e.g.
- Google Seach Friction pegs...
- Google Seach Gotoh UPTL...
- You'll need the Long version i.e. UPTL as the thickness of tuning stem hole is roughly 9.6mm
Category: 3D Printing