Dual 16 mm Button / Switch Housing for Core One Frame for Hackerboard ESP32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple housing for two 16-mm buttons or switches to connect it to e.g. a ESP32 or the Hackerboard
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple and compact housing designed to hold two standard 16 mm buttons or switches. It is intended for use with an ESP32, Hackerboard etc.
The housing mounts directly to the Core One frame using existing holes—no drilling or frame modification required.
Installation
Required hardware: 2 × M3 screws and nuts
Uses the existing mounting holes in the Core One frame
Cable Management
The rectangular opening on the back of the housing acts for the cable management.
It is wide enough to pass the connetcor of the switch through preventing that the cable is hanging down on the way back.
From there, the cables can be routed using the printer’s standard cable management to the back of the printerto e.g. the hacker board.
Compatible Buttons / Switches
The housing is designed for 16 mm panel-mount buttons or switches.
Example used for this model: https://a.aliexpress.com/_EQaoZKU