1 / 3
Hot Shoe Mount - cable tie - bike, scooter, motorcycle — zdjęcie 1
1 / 3

Hot Shoe Mount - cable tie - bike, scooter, motorcycle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hot Shoe Mount

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Hot shoe mount. Attaches with cable ties.

Can be used on any handlebar. Bicycle, scooter, or motorcycle.

Bending safety clip.

Use cable ties with a maximum width of 4 mm and a thickness of 1.5 mm. Two pieces. For better stability, apply double-sided tape.

Additionally enhanced version,  It is also easier to stick double-sided tape.

A 1/4" screw adapter is available for purchase on Aliexpress and Amazon.

PRINT:
  • Recommends PETG or ASA for outdoor use. But you can also print in PLA.

  • No supports required

Tagi