Yamaha interface x 22mm bar mount reinforced remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the model allows the user to mount the interface x controller on a 22mm bar
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
If you haven’t bought the stem mount, I designed a handlebar mount that fits the 22 mm diameter bar section where the original controller was mounted.
The mount is fixed to the bar using two zip ties.
I recommend adding a small piece of thin double-sided tape on the bottom to prevent rotation.
The only additional hardware needed is a relatively long M4 machine screw to attach the Interface X unit to the mount.
the hole is designed as a slight interference fit so a m4 will self tab into the plastic if you don't have one long enough
the model is designed to print without supports