Yamaha interface x 22mm bar mount reinforced remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
the model allows the user to mount the interface x controller on a 22mm bar
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
If you haven’t bought the stem mount, I designed a handlebar mount that fits the 22 mm diameter bar section where the original controller was mounted.
The mount is fixed to the bar using two zip ties.
I recommend adding a small piece of thin double-sided tape on the bottom to prevent rotation.
The only additional hardware needed is a relatively long M4 machine screw to attach the Interface X unit to the mount.
the hole is designed as a slight interference fit so a m4 will self tab into the plastic if you don't have one long enough
the model is designed to print without supports