Snowboard Forward Lean Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement forward lean block for a snowboard binding to replace a worn out and damaged part. Based on the worn out…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement forward lean block for a snowboard binding to replace a worn out and damaged part. Based on the worn out part taken off a pair of Union Bindings.
Instructions
Print standing up on the flat end at 100% or 70% fill. The teeth will print great without any support this way. Due to the small footprint, print with a large brim.
Recommend abs for strength as this is a mechanical part that will have considerable forces imparted on it on hard heel-side turns, landings, etc. Pla seems to work fine as well, just probably wont last quite as long.
Category: Sport & Outdoors