Snowboard Forward Lean Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement forward lean block for a snowboard binding to replace a worn out and damaged part. Based on the worn out…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 57
- Makes
- 0
- Views
- 680
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Share Alike
Replacement forward lean block for a snowboard binding to replace a worn out and damaged part. Based on the worn out part taken off a pair of Union Bindings.
Instructions
Print standing up on the flat end at 100% or 70% fill. The teeth will print great without any support this way. Due to the small footprint, print with a large brim.
Recommend abs for strength as this is a mechanical part that will have considerable forces imparted on it on hard heel-side turns, landings, etc. Pla seems to work fine as well, just probably wont last quite as long.
Category: Sport & Outdoors