1 / 1
Steel Sleeves Remix for Space Mushroom Remix — zdjęcie 1

Steel Sleeves Remix for Space Mushroom Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I didn't feel like mangling some bearings, so I substituted in some steel sleeves, and they work great.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't feel like mangling some bearings, so I substituted in some steel sleeves, and they work great.

 https://www.aliexpress.us/item/3256807345926314.html
I bought 4x of the 8x10x7 sleeves, and changed the diameter of the printed top and bottom dome to 10.2mm, works great. Tolerance on these sleeves is very good, I did have to take one drilled bearing out because it was too large and bound in the sleeve. So test your bearings and sleeves before assembly.

Print with as thin a layer as you can get away with for the areas that touch the sleeves.  I have made two of these, the second I heated up the plastic a touch with hot air to get the perfect fit.  An exacto knife handle fits these bearings perfectly and can be used to align the sleeves when the plastic is hot.

I have attached the FreeCAD files if you want to modify them.  I used the RealThunder fork.

Tagi