Steel Sleeves Remix for Space Mushroom Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't feel like mangling some bearings, so I substituted in some steel sleeves, and they work great.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't feel like mangling some bearings, so I substituted in some steel sleeves, and they work great.
https://www.aliexpress.us/item/3256807345926314.html
I bought 4x of the 8x10x7 sleeves, and changed the diameter of the printed top and bottom dome to 10.2mm, works great. Tolerance on these sleeves is very good, I did have to take one drilled bearing out because it was too large and bound in the sleeve. So test your bearings and sleeves before assembly.
Print with as thin a layer as you can get away with for the areas that touch the sleeves. I have made two of these, the second I heated up the plastic a touch with hot air to get the perfect fit. An exacto knife handle fits these bearings perfectly and can be used to align the sleeves when the plastic is hot.
I have attached the FreeCAD files if you want to modify them. I used the RealThunder fork.