1 / 4
BSI radar mount - 10th gen Honda Civic 5-door Hatchback — zdjęcie 1
1 / 4

BSI radar mount - 10th gen Honda Civic 5-door Hatchback

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Didn't feel like buying expensive factory mounts from overseas, paying the stupid tariff, so I made my own.

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
277
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I put the radar point rearward to around 13 degrees from the car's center line. No azimuth errors so far. I used CR-V (TLA) radar in a Civic Hatchback (TGG) and so far haven't had any issues from that. The radar does report this on CAN in one the main messages but again, it doesn't appear to be an issue.

The mounting holes were tight on the passenger side and barely fit. Could probably rework those a little bit.

Workflow:

  • Modeled from a scan with Heges (paid, just buy it) on iPad Pro (better face id resolution than my newer iphone).

  • STL generated in Heges

  • Cropping the scan to just what I need in fusion, also done in Heges

  • Exported, AirDrop, the cropoped STL to my Mac.

  • Converted to OBJ with Meshlab, for Instant Meshes

  • Reduced/remeshed in Instant Meshes

  • Solidified (modifier) slightly in Blender

  • Modeled in Fusion.

All on Mac OS.

Tagi