10-Inch Rack 0.5U Filler Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Half-unit (0.5U) filler plate for standard 10-inch racks when a full 1U panel is not needed
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a 0.5U (half-unit) filler plate for standard 10-inch racks.
Sometimes you don’t need a full 1U blank. This plate is intended to fill half a rack unit to cover gaps, improve airflow control, or clean up an install where equipment does not align to full U spacing.
Features:
- Standard 10-inch rack width
- Half-U height
- Simple, flat design
- Mounting holes aligned for standard rack screws
Use cases:
- Filling partial rack gaps
- Mixed-depth or odd-sized equipment
- Lab, home rack, or temporary installs
- Visual cleanup without wasting a full 1U
Print notes:
- No supports required
- Print flat
- PETG or ABS recommended for racks with heat, PLA is fine for light-duty use
Layer height: 0.2mm
Infill: 20–30%
Walls: 3+
Supports: None
Orientation: Flat on bed
Designed from scratch and kept intentionally simple.