Caravan stabilizer drawbar pressure block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
caravan stabilisator dissel drukblokje For 90's trailer stabilizer had broken pads because the plastic was brittle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This caravan stabilizer has been mounted on my father-in-law’s drawbar since the 1990s. Over the years, the original pressure pads that clamp the tubes against the drawbar became brittle and eventually cracked due to age and exposure.
I redesigned these pressure pads from scratch and printed them in TPU with 100% infill to provide flexibility, durability, and a long service life. The new parts are designed to closely match the original function while improving resistance to cracking and wear.
This design is intended as a direct replacement for worn or broken stabilizer pressure pads on older caravan setups.