Slanted Socket Rack SAE and MM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Socket rack slanted for drawer storage
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
*** SEE Edit Below ***
I wanted something different from designs I have seen to hold my sockets in my toolbox. So I made this slanted socket rack. It fits nicely in the shallow drawers of my toolbox. And the slanted design makes it easy to see and get the sockets off.
I also have a SAE version.
If time allows I am going to make one for 3/4 and 1/4 drive sockets.
I had to print in 2 pieces since my print bed is small. I put 2 3/8" holes to allow for dowels to put the 2 sides together.
If you like my design please leave a comment and like my designs.
*** EDIT ***
I have added the SAE version. It lays down a bit more for the deep sockets. And the regular sockets stand up a little straighter. The Socket Rack MM version 2 matches the SAE version as it lays down farther for the deep sockets and the regular sockets stand up straighter
Notes:
Each side uses about 215g
Takes about 16 hours per side to print
.2mm
PLA
15% infill
Tree supports