Slanted Socket Rack SAE and MM
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Socket rack slanted for drawer storage
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 90
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
*** SEE Edit Below ***
I wanted something different from designs I have seen to hold my sockets in my toolbox. So I made this slanted socket rack. It fits nicely in the shallow drawers of my toolbox. And the slanted design makes it easy to see and get the sockets off.
I also have a SAE version.
If time allows I am going to make one for 3/4 and 1/4 drive sockets.
I had to print in 2 pieces since my print bed is small. I put 2 3/8" holes to allow for dowels to put the 2 sides together.
If you like my design please leave a comment and like my designs.
*** EDIT ***
I have added the SAE version. It lays down a bit more for the deep sockets. And the regular sockets stand up a little straighter. The Socket Rack MM version 2 matches the SAE version as it lays down farther for the deep sockets and the regular sockets stand up straighter
Notes:
Each side uses about 215g
Takes about 16 hours per side to print
.2mm
PLA
15% infill
Tree supports