Dust collector for Bosch PBD40
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use when drilling alot of holes or sanding on your drill press.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 2541
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I have a very small workshop, so I have to get creative with my tools. I am using the drill press as a rotary sander and needed a way to quickly attach dust collection. It works perfectly! If you want the same setup, just buy the sanding pad with velcro for a drill and you're good to go.
The adapter for the hose attaches to the drill press shaft, with one M6 hex screw. The design accept an M6 nut and i attached a "hand screw" as well, so you dont need any tools to adjust it.
The opening for the hose is 36mm. If your hose is different, just make a quick adapter.
HW needed:
M6x45 hex screw
M6 nut