Prusawire BTT mini 12864 V2.0 display mount & front
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display housing for BTT mini 12864 v2.0 with left-side SD card slot that also replaces the two "front grill" parts
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Variant selection
Select the variant according to which Prusawire version you are on. B1 is the fromer beta release while R1 is the updated release 1 in which the screw holes are 2mm lower in Z direction.
Printing
You probably need a little support structure for the SD card slot (see pic 4), but it might work without it.
The X-part for the reset button can either be printed as a multimaterial print, printed separately and glued in or simply just left out.
Installation
Use 4 M3x6 or M3x8 screws to fix the display
Connect the cables
Attach the mount to the printer front using 4 M4x10 or M4x12 cylinder head screws