Prusawire BTT mini 12864 V2.0 display mount & front
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display housing for BTT mini 12864 v2.0 with left-side SD card slot that also replaces the two "front grill" parts
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Variant selection
Select the variant according to which Prusawire version you are on. B1 is the fromer beta release while R1 is the updated release 1 in which the screw holes are 2mm lower in Z direction.
Printing
You probably need a little support structure for the SD card slot (see pic 4), but it might work without it.
The X-part for the reset button can either be printed as a multimaterial print, printed separately and glued in or simply just left out.
Installation
Use 4 M3x6 or M3x8 screws to fix the display
Connect the cables
Attach the mount to the printer front using 4 M4x10 or M4x12 cylinder head screws