65mm Dual Whoop Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds two 65mm whoops, 8 batteries, props, screws, & spare parts.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
THIS PAGE IS STILL UNDER CONSTRUCTION - THE FILES ARE FINALIZED, BUT THE PHOTOS AND PRINT SETTINGS ARE NOT UP TO DATE.
This case holds two 65mm whoops, 8 batteries, and has three small parts bins perfect for any accessories or parts you bring with you while flying. Everything prints in place with minimal supports and requires no additional hardware.
Print Settings:
Lid - 0.2mm Layer Height, 2 Walls, 15% infill
Case - 0.2mm Layer Height, 2 Walls, 15% infill
Battery Insert - 0.2mm Layer Height, 2 Walls, 15% infill
Storage Insert Lid - 0.2mm Layer Height, 2 Walls, 15% infill
Storage Insert Top Bin - 0.2mm Layer Height, 2 Walls, 15% infill
Storage Insert Middle Bin - 0.2mm Layer Height, 2 Walls, 15% infill
Storage Insert Bottom Bin - 0.2mm Layer Height, 2 Walls, 15% infill
Storage Insert Handle - 0.2mm Layer Height, 4 Walls, 15% infill