Hadley 114 AstroHopper MagSafe Phone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A MagSafe mount for using AstroHopper on the Hadley 114
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this phone mount so that I can easily use AstroHopper on my Hadley114.
This design does not require disassembling the Hadley to install, other than removing one screw.
Simply remove the one 10-24 screw where it will be mounted, place the mount in position, and reinstall the screw. I designed it so the original screw will be long enough to still tighten onto the aluminum dowels.
I used this MagSafe mount from amazon that comes with double-sided tape so it simply attaches to my 3D printed mount. https://www.amazon.com/dp/B08SM17MM9?ref=ppx_yo2ov_dt_b_fed_asin_title
Im sure other mounts from amazon would work if they are the correct size.