Heart-shaped Box

I made this cute little heart box in Tinkercad for my wife for Valentine's Day.  It's small but scalable and will be a fun way to store small jewelry or rings, etc.  I did customize the one I made with some text showing the years we've been together!  It' a fun little print.  The lid has a recessed lip so it sits inside the box and won't slide off easily, but lifts out no problem.

Filament: I printed using OVV3D Wood PLA Walnut, but you can use any PLA or PETG and it should be fine. 

The parameters below are what I find successful with the Wood type PLA.

Layer: 0.2mm

Speed: First layer 50mm/s, then 200mm/s

Nozzle Temp: 200 - 220 deg

Bed Temp: 60 deg

Infill: 15%, Honeycomb or gyroid for additional strength.

Surface pattern: Rectilinear or monotonic are fine, but whatever you want the look to be will work.

Supports: Depending on if you put text on the top.  I did that so I used a "Normal" auto grid type support to catch the lip on the lid.  If you just print it with a flat top flip the lid on its face and you won't need supports :)