Heart-shaped Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this cute little heart box in Tinkercad for my wife for Valentine's Day. It's small but scalable and will be a fun way to store small jewelry or rings, etc. I did customize the one I made with some text showing the years we've been together! It' a fun little print. The lid has a recessed lip so it sits inside the box and won't slide off easily, but lifts out no problem.
Filament: I printed using OVV3D Wood PLA Walnut, but you can use any PLA or PETG and it should be fine.
The parameters below are what I find successful with the Wood type PLA.
Layer: 0.2mm
Speed: First layer 50mm/s, then 200mm/s
Nozzle Temp: 200 - 220 deg
Bed Temp: 60 deg
Infill: 15%, Honeycomb or gyroid for additional strength.
Surface pattern: Rectilinear or monotonic are fine, but whatever you want the look to be will work.
Supports: Depending on if you put text on the top. I did that so I used a "Normal" auto grid type support to catch the lip on the lid. If you just print it with a flat top flip the lid on its face and you won't need supports :)