Smart Orbiter V3 (E3D Revo) extruder mount for Raise3D Pro 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use the Smart Orbiter V3 Revo extruder on the Raise3D Pro 2.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgrade your Raise3D Pro 2 to the Smart Orbiter V3 in the E3D Revo edition.
This is part of a larger upgrade. Reusing the original Raise3D toolboard might be possible as the plastic parts of the Raise extruder are reused as drag chain mount. As such, the mounting points for the Raise toolboard should still be accessible.
For license reason,s the fan duct and PCB clicky mount are seperate uploads:
Material required:
4x M3 heat set inserts
M3 screws
PTFE tube (from the Orbiter V3 inlet to the "old" Raise3D extruder plastic part
Orbiter V3 in the E3D revo Version
fan: 6023 blower fan
adhesive tape to connect the fan outlet to the fan duct
optional: Toolboard: Orbitool SO3 for Klipper or a SHT36 max for RRF (Duet 3)
optional: Bed leveling: Voron PCB Klicky (https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky)