Liczymy pasujące modele…
07/17/2023: 0.6mm Nozzle First Layer Tips! Read below on how to get rid of those gaps/crevices in your first layer when using 0.6mm nozzles. The following was performed on the 0.2mm Layer Height Profile. Manually increase your z-probe…
Replacement Part for the PTFE Tube in the Raise3D Pro3 Extruder. The original part has a relatively big gap between extruder wheels and PTFE Tube. In combination with the soft PTFE Material it gets deformed easily and soft Filaments like…
I remixed the “Filler” spool holder to a compact form factor that was drop-in compatible with the Raise3d Pro2 and Pro2Plus machines. The stock spool holders on the Raise3d Pro2 machines were plastic semi-cylinders. Over the course of…
This should stop the spool holder from falling off during a spool change. Made for Raise3d N2 3d printer
This adapter enables you to replace the rather noisy 35mm extruder cooling fans with 40mm fans. Noctua fans are ideal to use due to their very quiet operation. This adapter reuses the existing exhaust duct. Due to the need to clear the…
I was inspired by others who had created similar mounts for their Ultimaker Hot Ends. So, I made one for my Raise3D Pro3. I still love my Prusa though:-). The current pictures are a prototype, the .3mf illustrates current iteration. I'll…
I bought a used Raise3D N2 Plus in really rough shape. One of the missing parts were the cooling fans for the tool head. The standard fans are 2x 35x10mm axial fans which are used for cooling the heatsink of the hotend (coldend) and for…
A holder for Spools with a smaler hole on a Raise3D N2 or N2 Plus. Category: 3D Printer Parts
The official 35mm fan mount that comes with the N2 & N2 Plus Printer Works with Dual Head as well. Print Settings Printer: Raise3D N2 Plus Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .2mm Infill: 10% Notes: for best…
I've designed an adapter to use BambuLabs-Style Hotends in an Raise3D Pro3. If you're asking “but why” would someone use cheap hotend or even clones in a so “expensive” Maschine like the Pro3. Simply said, it works (much) better than the…
This is a 79mm Spool Holder that can support FormFutura 1kg spool and permit to close the door for the Raise 3D Pro2. I printed it using the Raise3D with ABS at 0.2, infill 30% Remix of…
An extended spool holder for the Raise3d Pro3. Printed with PETG. Mounted with 3 DIN912 M4 x 30mm screws on the printer. The door still closes, it is only bent a little bit at my printer.
Do you intend on safely transporting your Raise3D N1, N2, Pro2, and/or Pro3 series printer and do not want your printhead to slide around freely (which could damage the electronics like the motion controller board, touchscreen computer,…
Inspired by http://www.thingiverse.com/thing:1360118 Spool holder to hold your Taulman filament. Allows the acrilyc door of the printer to close (see 3rd pic). Designed on Fusion 360. I used 70% infill on mine. Enjoy! Category: Other
This isn't something to print it's an STL representation of an Raise3D pro2 Plus bed to go into the machine properties in Simplify 3D (e.g. Options -> Machine -> Add, select this STL)
When printing large, dense parts out of ABS or PC, the bed will warp itself off the magnets. These clips help. Print out of ABS, Polycarbonate or a CF/GF polymer. PLA or Nylon will not work well (former is too soft at high temp, latter is…
No brim, no support necessary.
Use This spool holder allows to fit longer spools with smaller holes which did not fit on the original Raise3d N2 spool holder. Information The long version fits spools of a length up to 10cm (~4in) and a diameter bigger than 4.5cm…
I remixed a remix of a remix to get a neat silica-packed spoolholder with hygrometer for Raise3D Pro2. I used this mounting part (which has a nice pressfit) And used the large silica container and hygro-lid I bought a digital hygrometer…
Here is a set of two mounting brackets to mount a LED strip lamp to the top left shelf of the Raise3D N2 printer. Each bracket consists of two parts. The bottom parts are attached to the shelf using the original screws and have a lip that…
Diese Halterung habe ich zum Druckbett-Kalibrierung entworfen. Die Meßuhr ist mittig zur Düse plaziert, somit kann das komplette Druckbett abgefahren werden. Google Translate: I designed this bracket for print bed calibration. The dial…
Holders to keep the top lid open, when printing PLA Print Settings Printer: Raise3D E2 Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: Spectrum S-Flex black Notes: Flex, or semiflex recommended to reduce vibrations, but any…
There was several times that the thumbscrews securing the print bed would become locked up after printing…even after cycling the bed temperature through various temperature ranges. I modified the screw cover to provide a little more…
This is a model of the large format Raise3D N2+ Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Notes: Rotate model 90 degrees on the X axis to minimize supports Category: 3D Printers
A simple remix with more accurately dimensioned holes and positions, which gives auto-aligning of the spacers. Thank you to @Skottke for the original design. Fitting these will enable to open the N1 door completely flush with the front…
Required: PTFE Tubing Length of Your Choosing (4mm OD x 3mm ID) (2) M4 x 12mm Screws 1in Wide, Heavy Duty Double Sided Tape 0.15mm Layer height (recommended to maintain printed threads) This PTFE tubing holder utilizes integrated clamps…
For too long I have detested using spring clips on the front of the glass bed on my N1. So I thought it time to create some corner brackets, as I've done for many other machines. These are the result. There are 2 brackets, one for the…
Thanks to Julia Truchsess for the idea. Designed from scratch using Fusion 360. Official artwork provided by Raise3D. This thing in combination with 22-24 inches of PTFE tubing can be used to reduce the bend radius of your filament as it…
The Raise3D extruder board has a protective cover, I edited it for dual color 3D printing and made this black and red ABS print on my N2 Plus Dual. I used a wipe wall and printed this with 0.15 mm layers, I also added the Ideamaker file.…
This noisy fan sucks! The fan for the external cooling of the ventilation management system is extremely loud. In my case, the lower mounting points of this fan were also broken. So i looked for a way to reattach the fan. I used this…
Remixed from http://www.thingiverse.com/thing:1528661 by dhylands to hold a Samsung Smartcam. So far this camera has served me well in the 3d printing world. Step and Fusion files also included for your convenience. The side panel will…
This is the fan duct for my Smart Obriter V3 revo mount on the Raise3D Pro 2: Fan is a 6023 blower (approx. 10 CFM airflow with this mount). Significantly outperforming 5015 fans found on most 3D printers (approx. 3 CFM). Note: Works only…
This thing will be discussed in detail on the 3D Printing Today Podcast: threedprintingtoday.libsyn.com or search the iTunes music store or stitcher radio for "3D Printing Today" This thing is a modification of the Raise3D N2 and N2+ bed.…
A simple remix adding a bracket to enable the scroll wheel holder to be clipped over the top of the upper frame. V2 - updated to sit the scroll wheel slightly off the rear top frame due to the oval shape of the housing. Category: 3D…
Aug. 20, 2018: Remixed the filament clip by "walter" to fit Raise3D ABS and PLA filament spools. R3D ABS Filament Oct. 9, 2018: Designed a new clip that works with Hatchbox filament. This provides a much tighter fit than the original.…
Dock to park the PCB Klicky probe on the Raise3D Pro 2. Can be used with the orbiter V3 mount:
UPDATE 03/02/16: I have replaced the original with a new version that can be used with a spring to dynamically tension the pinch pressure. This version requires that the original M3 12mm screw be replaced by an M3 18mm one. I replaced the…
Pour utiliser, il suffit d'imprimer et vérifier que la hauteur des ronds est bien de 1mm
This is a mod to change the original part cooling fans from the Raise3D Pro2 to using blower style 4010 which provide much, much more cooling power. I used the DragonBurner V8 design and made a few cuts and adjustments to it would fit the…
This is the fan duct for my Smart Obriter V3 revo mount on the Raise3D Pro 2: Fan is a 6023 blower (approx. 10 CFM airflow with this mount). Significantly outperforming 5015 fans found on most 3D printers (approx. 3 CFM). Note: Works only…
Upgrade your Raise3D Pro 2 to the Smart Orbiter V3 in the E3D Revo edition. This is part of a larger upgrade. Reusing the original Raise3D toolboard might be possible as the plastic parts of the Raise extruder are reused as drag chain…
Dock to park the PCB Klicky probe on the Raise3D Pro 2. Can be used with the orbiter V3 mount:
This is a mod to change the original part cooling fans from the Raise3D Pro2 to using blower style 4010 which provide much, much more cooling power. I used the DragonBurner V8 design and made a few cuts and adjustments to it would fit the…
Raise3d Pro2 Compact Spool Holder with a Benchy Logo and a modified roller for R6Z Bearings. Using Ideamaker, the slicer will help align BenchySpoolholder.stl and BenchyIcon.stl when imported together.
Upgrade your Raise3D Pro 2 to the Smart Orbiter V3 in the E3D Revo edition. This is part of a larger upgrade. Reusing the original Raise3D toolboard might be possible as the plastic parts of the Raise extruder are reused as drag chain…
Listen to the 3D Printing Today Podcast for more about this thing: threedprintingtoday.libsyn.com This object is a press on duct for a downward fan upgrade for the 1st production run of the Raise3D N2. Chances are later versions will have…
My first upload here, I have a couple on MakerWorld, but figured this is a more fitting place for this. This is a low profile 3010 to Noctua NF-A4x10 fan adapter. My work's Raise3D E2's heat sink fan died out and naturally I wanted to…
Spools with a smaller inside diameter than 44mm do not fit on the stock Raise3D N2 spool holder This fits a 38mm diameter spool and allows the side door of the printer to close. The profile of the mounting end was taken from on…
The Raise3D E2 printer has a legendary sh$#&" camera. So, inspired by the Raise3D-forums I tested a solution with a new camera that uses the same connector as the old one. So its really easy to connect, and there is no need for software…
This is a remix of the fantastic bracket by Firesped and Anubis132. Unfortunately when printed on my Zortax the fan port was too large for the blower fans I was using so this is a simple remix making the fan duct entrance just 0.8mm…
Print it gap facing top, no support needed. Made for taping it to the side of your printer or glueing it at a wall.
The stock Raise 3D E2 build plate handle often catches and prevents the build plate from sitting flat - unless it's in exactly the right place. This is somewhat annoying because the magnets are quite strong and you end up having to trial…
Hinge designed as replacement for RAISE3D E2 top lid. 0.25mm tolerances. Printed laying down in PLA without supports, supports could be added for more accurate hole recess. Can also be used for other applications
Tired of ripping you nail trying to open the door of your Raise3D pro 3D printer ? Here is a custom Door Knob for my Raise3d pro 3 plus. It is just a remix with a much better handle. There is two files. One for 2xM4 insert and one with…
Raise3D Pro3 Hotend Halter mit 12 Schnellwechsel Verriegelungen. Für ein Sicheres aufgeräumtes Lagern der Hotends, um Beschädigungen bei nicht Benutzung zu vermeiden.
Raise3D Pro3 Hotend Halter mit 10 Schnellwechsel Verriegelungen. Für ein Sicheres aufgeräumtes Lagern der Hotends, um Beschädigungen bei nicht Benutzung zu vermeiden.
Raise3D Pro3 Hotend Halter mit Schnellwechsel Verriegelungen. Für ein Sicheres aufgeräumtes Lagern der Hotends, um Beschädigungen bei nicht Benutzung zu vermeiden.
Raise3D released a filament runout sensor for the N series. After a while they shared a new design of the housing for less stress on the filament. I changed the design a bit. The bottom connecting parts for the print head were removed…
Spool holder for Raise3D Pro 2. Use two 608 bearings (Outside diameter: 22 mm, Inside diameter: 8 mm, Width: 7 mm) ABEC 11 would be perfect! Easy to fit Can hold any spool Door can be closed completely Smooth rotation Support me on Ko-Fi
