Raise3D Pro2 Heated Bed Securing Screw Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement covers for the heated bed securing screws.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
There was several times that the thumbscrews securing the print bed would become locked up after printing…even after cycling the bed temperature through various temperature ranges. I modified the screw cover to provide a little more leverage in case they get locked up again.
I tried to nail down the tolerances so that it was a lasting press fit. If it's too loose, a dab of glue will do. If it's too tight, heat the thumb screw first, then press on the cover.
I printed with black Prusament ASA using the following default settings in PrusaSlicer.
Print settings: 0.20mm QUALITY
Filament: Prusament ASA
Printer Settings: MINI+
I chose to acetone vapor smooth them for appearances. I'm sure PLA or PETG would do the trick as well.