Rack for Ikea CITRONHAJ and GULDFISK small bottles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric design for angled rack for the little bottles of Ikea
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a parametric file for a rack with the little bottles Guldfisk and Citronhaj (link)
number per side
number per rows
angle of the bottles
Various sizes generated below.
You also get a funnel and a little joiner piece that you can glue or screw in the middle (anywhere) of a rack to anchor it so it doesn't move.
It includes the model of the bottle in the fusion 360 file
Tested at 45 degrees and I did use support LPon Bambu Labs. Without is possible but risky. at 5 wide x 4, it's a 13 hours print on normal X1C Bambulabs (0.24 layer height).
--------------------
I also made a little label generator if you want something easy. It will print at the diameter of the little jars.
https://www.keays.nl/label-generator.html
Enjoy!