Sega Dreamcast Internal 2.5" Hard Drive Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Internal 2.5" hard drive mount for a Dreamcast hard drive mod.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Sega Dreamcast 2.5" (9.5mm) internal hard drive mount/caddy for use with the IDE mod. Keeps the hard drive secure and makes the mod look a lot cleaner. This screws to the top of the GD-ROM board enclosure with three M4x6 screws. You need to force the screws in initially to create the threads as the holes weren't meant for screws (or use a drill and a tap thread bit). The hard drive needs M3x8 screws for mounting.
NOTE: This will not work with the VA2 model Dreamcast as it has a different style GD-ROM drive with no enclosure to mount the caddy to.
Update 12/17/2023:
I made some improvements to the design:
- Fixed the placement of some of the mounting holes which were slightly off.
- Added mounting holes for a CF adapter like this one. The holes are pre-threaded but may take some force to get the screw started. You can use the same M3x8 screws that are used for the HDD.
- Added an alternate design that had pegs on the left side instead of holes. This makes it much easier to remove the drive as the left-side screws aren't easily accessible with the power supply in the way.
Printing tips:
You can print it flat or vertical. It prints faster vertically but will require supports.