Sega Dreamcast Internal 2.5" Hard Drive Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Internal 2.5" hard drive mount for a Dreamcast hard drive mod.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 63
- Makes
- 0
- Views
- 554
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Sega Dreamcast 2.5" (9.5mm) internal hard drive mount/caddy for use with the IDE mod. Keeps the hard drive secure and makes the mod look a lot cleaner. This screws to the top of the GD-ROM board enclosure with three M4x6 screws. You need to force the screws in initially to create the threads as the holes weren't meant for screws (or use a drill and a tap thread bit). The hard drive needs M3x8 screws for mounting.
NOTE: This will not work with the VA2 model Dreamcast as it has a different style GD-ROM drive with no enclosure to mount the caddy to.
Update 12/17/2023:
I made some improvements to the design:
- Fixed the placement of some of the mounting holes which were slightly off.
- Added mounting holes for a CF adapter like this one. The holes are pre-threaded but may take some force to get the screw started. You can use the same M3x8 screws that are used for the HDD.
- Added an alternate design that had pegs on the left side instead of holes. This makes it much easier to remove the drive as the left-side screws aren't easily accessible with the power supply in the way.
Printing tips:
You can print it flat or vertical. It prints faster vertically but will require supports.