Modular Storage System - dividers for drawers REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dividers so you can organize your stuff even further!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I added some dividers to use with @RNeese's excellent Modular Storage System. Note that these are drawers only. You will need the body from the original model. I've uploaded only drawers with the added dividers; if you don't want any dividers (eg. full length) you'll have to get them from the original model.
Drawers with the following configurations are available:
1 divider (half, one-third/two-thirds, one-quarter/three-quarters)
2 dividers (thirds, one-half/one-quarter/one-half, one-quarter/one-half/one-quarter, one-quarter/one-quarter/one-half)
3 dividers (quarters)
The medium drawer has all of the above variants plus variants with a vertical divider
Recommended Print Settings
0.4mm nozzle
0.2mm layer height
10% infill
Any filament that isn't flexible
Print as oriented