Modular Storage System - dividers for drawers REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dividers so you can organize your stuff even further!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I added some dividers to use with @RNeese's excellent Modular Storage System. Note that these are drawers only. You will need the body from the original model. I've uploaded only drawers with the added dividers; if you don't want any dividers (eg. full length) you'll have to get them from the original model.
Drawers with the following configurations are available:
1 divider (half, one-third/two-thirds, one-quarter/three-quarters)
2 dividers (thirds, one-half/one-quarter/one-half, one-quarter/one-half/one-quarter, one-quarter/one-quarter/one-half)
3 dividers (quarters)
The medium drawer has all of the above variants plus variants with a vertical divider
Recommended Print Settings
0.4mm nozzle
0.2mm layer height
10% infill
Any filament that isn't flexible
Print as oriented