Spig Wing Jig - Flinging Arrows Mod V0.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig used to align Spin Wing type vanes on arrows.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Ludodg for the initial design.
V0.2 1/27/2026
Initial public beta release.
Jig has been tested for printability.
Successfully used to fletch 1 dozen of the following arrows with spider vanes
Easton x10
Pandarus CA320 Elite
Avalon Classics 4.2mm
Victory VapsKnown Issues
*Nock holder hexagon fits with tuned printers. For printers with looser tolerances scale the nock holder by 1%.
TODO
BOM - Links, printed parts.
Print Settings
Assembly Instructions
Longer Holder for Indoor Vanes
Jet6 clamps
Cleanup Fusion 360 File
Options for Printed Beams
Description
BOM
5x M5x10 BHCS
2x M5 Roll In T Nut
2x M5x12 Thumbscrews
1x 2020 V-Slot 300mm (Centers tapped for M5)
1x 2020 V-Slot 100mm (Centers tapped for M5)
1x 10mm elastic band 700mm long (~28 inches)
1x Cord lock for elastic band (Can also just tie a knot)
Print Settings
PLA/PETG can be printed without changes needed
ABS parts are not scaled to account for shrinkage. You will need to scale them up. Recommended (100.45)
Used standard Voron settings for test parts https://docs.vorondesign.com/sourcing.html#print-settings